Cell Culture Flasks
Alkali Scientific 125mL Erlenmeyer Flask with Vented Cap and Flat Bottom, PETG, Sterile, 24/cs
Our Erlenmeyer Flasks are made from PETG with an HDPE cap and are manufactured in air filtered clean rooms. These Erlenmeyer Flasks are ideal for shaker culture applications. Erlenmeyer Flasks are sterilized by E-Beam and are non-pyrogenic, DNase and RNase free. They are non-toxic and environmentally friendly. Vent caps have 0.22 μm hydrophobic filters for gas exchange without contamination. They come packaged individually in a sterile zip sealable bag.
Bellco Glass, Inc. Bell-Flo Complete,500mL-100
Manufactured from type 1 class a Borosilicate glass. Bottom indent and 3 vertical baffles for optimal mixing. MADE IN THE USA. Sidearm cap: 45mm Center cap: 100mm Dimensions: 170" x 110" Flask size: 500ml
Chemglass Life Sciences Spinner Flask, 100mL, Dimpled Bottom, Replacement Glass Flask ONLY
Replacement vessel is supplied with black phenolic rubber lined caps for the 18mm side arms, polypropylene caps and pouring rings for the GL-32 and GL-45 side arms.
Bellco Glass, Inc. Flat Bottom AHB Spinner ,25mL No Ctr Cap
Adjustable spinner height. Ptfe impeller assembly rides on glass bearings for friction free operation. 25ml & 50ml have black phenolic rubber lined caps. 100ml-300ml have polypropylene caps, silicone gasket and pouring rings. MADE IN THE USA. Size: 25ml Dimensions: 38mm OX 120mm TALL. CENTER NECK: 38mm. SIDEARMS: 18mm. BLACK PHENOLIC RUBBER LINED SCAPS. GRADUATIONS: 5ml TO 25ml.
Chemglass Life Sciences 2-Port Assembly for 1L Media Bottles Only, Complete
Our probe holders are designed to secure pH and DO probes into 45mm vertical sidearm vessels.Includes thermoplastic, polyester cap and silicone gasket.This assembly is designed to hold an Ingold pH or DO electrode securely in place in your cell culture vessel via the 45mm sidearm.It consists of: red high temperature 45mm screw cap, 316L SST probe holder with a Pg 13.5 thread, and a white silicone rubber liner. comes fully assembled for fast and easy set-up.
Chemglass Life Sciences 12mm GL-45 Probe Holder, Compression Style
Our probe holders are designed to secure pH and DO probes into 45mm vertical sidearm vessels.Includes thermoplastic, polyester cap and silicone gasket.This assembly is designed to hold an Ingold pH or DO electrode securely in place in your cell culture vessel via the 45mm sidearm.It consists of: red high temperature 45mm screw cap, 316L SST probe holder with a Pg 13.5 thread, and a white silicone rubber liner. comes fully assembled for fast and easy set-up.
Chemglass Life Sciences BioProcess Spinner Flask, 500mL, Flat Bottom, Complete
Flat bottom spinner flasks promote optimal growth of suspension cultures.The complete system includes a flask with two angled sidearms and a PTFE paddle with glass shaft that adjusts through the compression fitting in the cap.
Chemglass Life Sciences Impeller Assembly Only, for 1L & 3L Adjustable Hanging Bar Spinner Flasks
Impeller Assembly Only, for 100-500mL Adjustable Hanging Bar Spinner Flasks.
Biopioneer T75 TREATED,STERILE,100/CS
T75 treated, sterile, 5 per sleeve, 100/cs limit 5 cases per order
Chemglass Life Sciences Flask, 2800mL, Fernbach, 70mm Screw Thread, With 6 Baffles, Vented Cap, Approx OD x Height (mm): 210 x 230
Flask, 2800mL, Fernbach, 70mm Screw Thread, With 6 Baffles, Vented Cap, Approx OD x Height (mm): 210 x 230. 2800mL flask with 3 baffles on the lower outside edge of the flask and 3 baffles on the bottom surface of the flask to help oxygen transfer to the culture medium.
Chemglass Life Sciences BioProcess Spinner Flask, 500mL, Dimpled Bottom, Complete
Microcarrier spinner flasks promote optimal growth of suspension and microcarrier cultures.Indented bottoms, 100mL thru 1000mL, prevent accumulation of microcarrier beads under the impeller paddle.Please Note: The 6L and 8L Versions Do Not Have Dimpled Bottoms.The complete system includes a flask with two angled sidearms and a PTFE paddle with glass shaft that adjusts trough the compression fitting in the cap.
Chemglass Life Sciences BioProcess Spinner Flask, 100mL, Dimpled Bottom, Internal Impeller, Complete
MicroCarrier spinner flasks promote optimal growth of suspension and microcarrier cultures.Indented bottom (100mL thru 1000mL) prevents accumulation of microcarrier beads under the impeller paddle.The 3L version does not have a dimple.The complete system includes a flask with two angled sidearms and a PTFE paddle assembly that attaches underneath the cap decreasing the risk of contamination.
Chemglass Life Sciences BioProcess Spinner Flask, 3, 000mL, Flat Bottom, Complete
Flat bottom spinner flasks promote optimal growth of suspension cultures.The complete system includes a flask with two angled sidearms and a PTFE paddle with glass shaft that adjusts through the compression fitting in the cap.
CELLTREAT Scientific Products 75cm2 Tissue Culture Flask - Plug Seal Cap, Sterile
CELLTREAT Scientific Products 75cm¿ Tissue Culture Treated Flask. Tissue Culture Treated Flasks have uniform hydrophilic surface ideal for consistent cell attachment. Convenient zip-closure bag is a practical alternative to folding and taping open bags. Large opening, canted neck design and moderate angles allow easy access to entire flask surface; ideal for cell scrapers. Stable base enables filling with flask standing upright. Thick, durable walls. Flask is printed with lot number and expiration date for easy identification and tracking. Plug seal cap and maximum volume of 250mL. RNase/DNase free and non-pyrogenic. Every case is printed with the lot number for quality traceability. Packaged sterile, 5/re-sealable bag, 100/case.